Broward · Miami-Dade · Palm Beach — Licensed & insuredbids@standard-insulation.comOpen 24/7 · (561) 975-6204
STANDARDINSULATION · SOUTH FLORIDA
Spray Foam · Sep 17, 2026 · 2 min read

Open-Cell vs. Closed-Cell Spray Foam in Hollywood, FL: Which One for Your Building?

Side-by-side comparison of open-cell and closed-cell spray foam for Hollywood, FL homes and commercial buildings — R-value, moisture, cost and which one fits each job.

Comparison table of open-cell and closed-cell spray foam: R-value per inch, density, air sealing, water resistance, vapor retarder, cost and common uses

Both products come out of a spray gun and both seal air leaks. After that they behave differently enough that picking the wrong one costs you money — either by overspending on a job that didn't need it, or by installing foam that can't handle the conditions.

Here's how we choose between them on Hollywood, FL projects.

The short version

  • Open-cell: about R-3.7 per inch, light and flexible, absorbs water, lower cost. Common on attic roof decks and interior walls.
  • Closed-cell: about R-7 per inch, dense and rigid, resists water, acts as a vapor retarder at typical thickness, higher cost. Common on commercial decks, coastal exposure, cold rooms and tight cavities.

Where open-cell usually wins

For a typical Hollywood house with ducts in the attic, open-cell on the roof deck brings the attic inside the envelope at the lowest cost per square foot. It's also easier to trim and inspect, and if a roof leak ever happens, water passes through rather than hiding behind rigid foam — which sounds bad but actually makes the leak visible sooner.

Installer applying spray foam insulation into open wall framing — Standard Insulation job photo
Open-cell expands quickly and fills irregular cavities, which suits framing and roof decks.

Where closed-cell is worth the premium

  • Coastal and flood-prone areas near the Intracoastal and the beach, where materials may get wet
  • Thin assemblies — flat roofs, shallow plenums, 2x4 walls — where you need R-value per inch
  • Metal roof decks in warehouses, where condensation control matters
  • Cold rooms such as coolers and wine rooms that need vapor control
  • Crawl spaces and block wall interiors where moisture is present
Technician spraying foam insulation on the underside of a sloped roof deck — Standard Insulation job photo
Closed-cell delivers roughly twice the R-value per inch, which matters when depth is limited.

Things that are true of both

  • Both air-seal, which is often the bigger comfort win in a leaky Florida house
  • Both generally need an approved thermal or ignition barrier under the Florida Building Code
  • Both require the space to be vacated during application and for a manufacturer-specified re-entry period
  • Both perform only if applied at the right thickness — ask for measurements, not just a price

Cost comparison

On a roof deck, open-cell typically runs $2.20–$3.80 per square foot installed and closed-cell $3.50–$6.50. Closed-cell reaches a target R-value in less thickness, but it rarely costs less overall. Detailed numbers are in our Florida insulation cost guide and the Boca Raton pricing example.

Questions worth asking any contractor

  • Which product and brand, and what thickness?
  • What R-value does that thickness deliver?
  • What thermal or ignition barrier are you using, and is it listed with that foam?
  • How long before we can re-occupy the space?
  • Will you provide thickness photos or measurements?

Still unsure? We'll look at the building and tell you which one we'd use and why — including when the answer is neither, and blown-in would serve you better. See spray foam for Hollywood homes, commercial spray foam in Hollywood, or our spray foam insulation service. Background reading: Department of Energy — Types of Insulation.

Need this done on your building? Standard Insulation serves every city in Broward, Miami-Dade and Palm Beach counties. Free written estimates with photographs, no obligation. Call (561) 975-6204 — we answer 24 hours a day — or request an estimate online.

Illustrations by Standard Insulation. Photos: Standard Insulation project photos from our Google Business Profile.

← Wine Room Insulation for Delray Beach Restaurant…Fireproofing and Firestopping for Delray Beach R… →
Keep reading

More from the journal.

Installer in protective coveralls and respirator spraying foam on a wall
Spray Foam · Oct 6, 2026

Hiring a Spray Foam Contractor in Boca Raton: Benefits, Trade-Offs and What to Ask

Residential spray foam in Boca Raton: the real benefits, when it is worth the cost and when blown-in is smarter, the downsides nobody mentions, and…

Read →
Installer spraying foam insulation into wall framing — Standard Insulation job photo
Spray Foam · Sep 17, 2026

Attic and Spray Foam Insulation in Delray Beach: Flat Roofs, Coastal Homes and Historic Districts

Insulation for Delray Beach homes — attic and roof-deck spray foam, flat and low-slope roofs, coastal humidity, block walls and houses in the city's…

Read →
Diagram showing the two places spray foam goes in a Hollywood home: the roof deck for a sealed attic, or the attic floor for a vented attic
Spray Foam · Sep 17, 2026

Spray Foam Insulation for Hollywood, FL Homes: Where It Goes and What It Costs

A Hollywood, FL guide to attic and spray foam insulation: roof deck vs. attic floor, cost per square foot, HVHZ and code requirements, and when…

Read →
Installer spraying foam insulation into a wood-framed wall
Home Comfort · Nov 1, 2026

Insulation Installation in Delray Beach: One Install Day, Hour by Hour

What insulation installation in Delray Beach looks like hour by hour: estimate photos, a pre-dawn start, home protection, air sealing and the…

Read →
Wall surface covered with black mold spots
Mold & Removal · Oct 28, 2026

Attic Mold in Delray Beach: A Season-by-Season Plan to Fix It for Good

Attic mold in Delray Beach follows the seasons. Learn the causes, warning signs, licensing rules and a calm rainy, hurricane and dry season plan to…

Read →
Installer pressing pink fiberglass batt insulation between wall studs
Home Comfort · Oct 25, 2026

Fiberglass Insulation in Boca Raton: A Buyer's Guide to Every Option

Fiberglass insulation in Boca Raton compared: batts vs blown, faced vs unfaced, R-values, cellulose and spray foam, plus a buyer's checklist before…

Read →
Free written estimates

Let's cool it down.

Tell us about the building. Homeowners, property managers, builders and general contractors across Broward, Miami-Dade and Palm Beach — one call covers the whole envelope.

Request a free estimate

Takes about 60 seconds. A real person follows up — usually the same day.

No obligation. Goes straight to our estimating team at bids@standard-insulation.com.

Call NowFree Estimate