
Insulation Removal in Deerfield Beach
If you live near the Deerfield Beach International Fishing Pier, you have probably felt it: the back of the house runs warmer, the AC never quite catches up and the bill tells the rest of the story.
Removal is the first step whenever we find wet, moldy, compressed or rodent-fouled insulation in a Deerfield Beach attic. Salt air, wind-driven rain and constant sun are hard on roofs, so the attics we open near the water often show staining, compressed wet patches and corroded fasteners.
We start by finding and photographing moisture, remove anything that has been wet, and favor fiberglass or closed-cell foam that tolerate humidity. Ventilation stays open, and every penetration gets sealed so damp air stays out of the house.
Why insulation removal matters in Deerfield Beach
Rats, roof leaks and storm damage all end the same way: insulation that is packed down, stained, smells and no longer insulates. Adding new material on top buries the problem. Removal gets the attic floor back to bare drywall so we can see and seal every gap.
Our removal crews use high-powered insulation vacuums, HEPA filtration and containment at the hatch. Once the attic is clear we sanitize where needed, air seal the ceiling plane and install fresh insulation to R-38. Mold remediation, where needed, is handled by licensed mold professionals under Florida law.
What's included
- Commercial vacuum extraction to bags outside
- Containment and floor protection at the access
- Rodent-fouled, wet and storm-damaged insulation
- Air sealing on the bare ceiling plane
- Fresh insulation installed the same week
What it costs
Removal typically runs $1.00–$2.00 per sq ft, plus reinstall. Every estimate is written and itemized — measured square footage, the R-value or thickness we will install, prep work and price — with alternatives side by side when there is more than one good answer.
Code & incentives
Deerfield Beach homes are built and inspected under the Florida Building Code. For energy purposes all of Broward County is Climate Zone 1, where the prescriptive minimum for ceilings is R-30. We design to R-38 because real attics settle, get walked on and run thin at the eaves. Broward County is also part of the High-Velocity Hurricane Zone, so roof-deck work is always coordinated with the roofing approvals.
Electric service in Deerfield Beach comes from Florida Power & Light (FPL). Insulation incentives change, so we check current programs before quoting — start with Florida Power & Light (FPL). For permits tied to remodels, additions or re-roofs, see the Broward County government. You can confirm any contractor's license on the Florida DBPR license search.