
Attic Insulation in Pompano Beach
Here is the short version for Pompano Beach: most of the heat that makes a South Florida house miserable comes straight down through the ceiling. We seal the attic floor, bring it to R-38 and keep the soffits breathing.
In Pompano Beach, the attic is where we start nearly every job. In a single afternoon we might see a 1940s cottage, a 1970s ranch, a new townhouse and a commercial build-out, each failing in its own way.
That variety is why every estimate starts with an on-site look. Older homes usually need removal and air sealing first; newer homes typically need a top-up and radiant barrier; commercial spaces get a specification-driven bid.
Why attic insulation matters in Pompano Beach
On a July afternoon the underside of a dark tile roof can push attic air well past 140°F. That heat radiates down onto the attic floor and conducts through whatever insulation is left — in a lot of Broward, Miami-Dade and Palm Beach homes, that is a few inches of settled fiberglass pushed around by cable installers and AC techs.
Our attic jobs start with air sealing: top plates, wire and plumbing penetrations, recessed lights, the attic hatch and the gaps around the air-handler platform. Then we install baffles so soffit vents stay open, and blow fiberglass or cellulose to a measured depth, with depth markers stapled to the trusses so you — and your inspector — can see what you paid for.
What's included
- Air sealing at every ceiling penetration before a single bag is opened
- Soffit baffles so the attic keeps breathing
- R-38 recommended (R-30 is the Climate Zone 1 code minimum)
- Depth markers and photos of the finished attic
- Old, wet or rodent-fouled insulation vacuumed out first when needed
What it costs
Blown fiberglass to R-38 typically runs about $1.10–$1.90 per sq ft, roughly $2,200–$4,500 for a 2,000 sq ft home including air sealing and baffles. Every estimate is written and itemized — measured square footage, the R-value or thickness we will install, prep work and price — with alternatives side by side when there is more than one good answer.
Code & incentives
Pompano Beach homes are built and inspected under the Florida Building Code. For energy purposes all of Broward County is Climate Zone 1, where the prescriptive minimum for ceilings is R-30. We design to R-38 because real attics settle, get walked on and run thin at the eaves. Broward County is also part of the High-Velocity Hurricane Zone, so roof-deck work is always coordinated with the roofing approvals.
Electric service in Pompano Beach comes from Florida Power & Light (FPL). Insulation incentives change, so we check current programs before quoting — start with Florida Power & Light (FPL). For permits tied to remodels, additions or re-roofs, see the Broward County government. You can confirm any contractor's license on the Florida DBPR license search.