
Spray Foam Insulation in Medley
Here is the short version for Medley: spray foam on the underside of the roof deck moves your thermal boundary to the roofline, pulls the ducts and air handler into conditioned space and air-seals the house in one pass.
Spray foam earns its cost in Medley when the ducts and air handler live in the attic or when there is no room to blow loose-fill. Most of the square footage is warehouse, flex and metal-roofed industrial space where the roof deck drives the heat load and condensation drips onto product.
We bid warehouse and flex projects from plans or a walkthrough — usually closed-cell foam on metal decks or liner systems — and handle the occasional residential attic nearby with blown fiberglass to R-38.
Why spray foam insulation matters in Medley
In a typical South Florida house the AC ductwork lives in the hottest place on the property. Foam on the roof deck changes that: the attic becomes a semi-conditioned space, duct losses fall sharply and humid outside air stops leaking in at the soffits and ridge.
Open-cell foam is lighter and more affordable and works well on most roof decks. Closed-cell is denser, adds racking strength and resists water, which is why we use it on metal buildings, flat roofs and below-grade or coastal assemblies. Every foam job includes ignition or thermal barrier compliance where the code requires it, and we coordinate with your roofer if the roof is being replaced.
What's included
- Open-cell or closed-cell, specified by assembly
- Unvented (conditioned) attic design per the Florida Building Code
- Brings ducts and air handler inside the envelope
- Ignition/thermal barrier compliance where required
- Fully air-sealed roofline — no more humid attic air
What it costs
Roughly $2.20–$6.50 per sq ft depending on foam type and thickness; a full roof-deck encapsulation on a 2,000 sq ft home often lands between $6,000 and $13,000. Every estimate is written and itemized — measured square footage, the R-value or thickness we will install, prep work and price — with alternatives side by side when there is more than one good answer.
Code & incentives
Medley homes are built and inspected under the Florida Building Code. For energy purposes all of Miami-Dade County is Climate Zone 1, where the prescriptive minimum for ceilings is R-30. We design to R-38 because real attics settle, get walked on and run thin at the eaves. Miami-Dade County is also part of the High-Velocity Hurricane Zone, so roof-deck work is always coordinated with the roofing approvals.
Electric service in Medley comes from Florida Power & Light (FPL). Insulation incentives change, so we check current programs before quoting — start with Florida Power & Light (FPL). For permits tied to remodels, additions or re-roofs, see the Miami-Dade County government. You can confirm any contractor's license on the Florida DBPR license search.