Insulation for Miami Shores homes
Ask anyone who has lived in Miami Shores through an August and they will tell you: the heat does not stop at the front door. It comes in through the roof, settles into the attic and pours down through the ceiling until the AC runs non-stop and the back bedroom never cools.
Most of what we see in Miami Shores is historic cottages, Mediterranean Revival and mid-century homes with plaster ceilings, flat roofs and tight attic access. Older homes have plaster or board ceilings, odd framing, flat roof sections and sometimes knob-and-tube remnants that must be evaluated before anything is covered.
We work carefully: inspect wiring with your electrician where needed, seal the ceiling from above, and choose materials that respect the building — blown fiberglass in open attics, foam on flat roof sections, nothing that traps moisture in old masonry.
What we install in Miami Shores
Every system below has its own Miami Shores page with local notes, pricing and FAQs.
Code, climate & rebates
Miami Shores homes are built and inspected under the Florida Building Code. For energy purposes all of Miami-Dade County is Climate Zone 1, where the prescriptive minimum for ceilings is R-30. We design to R-38 because real attics settle, get walked on and run thin at the eaves. Miami-Dade County is also part of the High-Velocity Hurricane Zone, so roof-deck work is always coordinated with the roofing approvals.
Electric service in Miami Shores comes from Florida Power & Light (FPL). Insulation incentives change, so we check current programs before quoting — start with Florida Power & Light (FPL). For permits tied to remodels, additions or re-roofs, see the Miami-Dade County government. You can confirm any contractor's license on the Florida DBPR license search.
Miami Shores insulation pricing
| System | Typical installed range |
|---|---|
| Blown fiberglass to R-38 (incl. air sealing) | $1.10–$1.90 / sq ft |
| Insulation removal (vacuum extraction) | $1.00–$2.00 / sq ft |
| Radiant barrier on rafters | $0.60–$1.40 / sq ft |
| Open-cell spray foam, roof deck | $2.20–$3.75 / sq ft |
| Closed-cell spray foam | $3.50–$6.50 / sq ft |
| Batts in open framing | $0.90–$1.80 / sq ft |
Typical Miami Shores ranges for 2026. Your written estimate is based on measured square footage, access, existing conditions and the system you choose.
How a Miami Shores job runs
- Call or send the form. We answer 24/7 and book a visit — usually within 24–48 hours in Miami Shores.
- Attic assessment. Depth, moisture, rodents, ducts, ventilation and air leaks — photographed.
- Written options. Systems, R-values and prices side by side.
- Install day. Containment, air sealing, insulation to measured depth, depth markers.
- Walkthrough. Photos and paperwork for your records, HOA or inspector.
Every Miami Shores job ends with depth markers, photos and a walkthrough. If something in the attic needs a roofer, a pest company or an electrician first, we will tell you — before you spend money on insulation.
From Miami Shores to our office
We are based at 5827 Plunkett St, Hollywood, FL 33023. Here is the route from Miami Shores: