🧴
R-3.7 (open-cell) to R-7.0 (closed-cell) per inch
Spray Foam Insulation
Open-cell and closed-cell polyurethane foam that air-seals and insulates in one application.
Learn about Spray Foam Insulation- Home
- Locations
- Brevard County
- Port St. John
Brevard County · Central Florida
Insulation Contractor in Port St. John, FL
Spray foam, blown-in, batt, Fi-Foil, radiant barrier, and insulation removal for Port St. John homes, businesses, and industrial buildings. Licensed, insured, and open 24/7.
- Serving all of Port St. John
- Free written estimates
- Open 24/7
- Licensed & insured
Most Port St. John homeowners call us for one of three reasons: a room that never gets comfortable, an electric bill that keeps climbing, or water that came through the roof and soaked the attic. All three are insulation conversations. Standard Insulation serves every neighborhood in Port St. John and the surrounding Brevard County area with spray foam, blown-in, batt, Fi-Foil, radiant barrier, and full removal and remediation.
Where your ductwork lives changes the whole plan
In a large share of Port St. John homes, the air handler and the entire duct system sit in a vented attic that hits 135 degrees in August. That means every foot of duct is losing capacity, and any leakage in the supply side is dumping conditioned air into an attic while the return side pulls superheated, humid attic air into your house.
When we find that situation in Port St. John, the conversation usually turns to either a radiant barrier plus a heavy attic top-up, or a closed-cell spray foam roof deck encapsulation that brings the entire attic — ducts and all — inside the conditioned envelope. The second option costs more and does more.
Storm damage and insulation removal in Port St. John
Port St. John sits in a part of Florida where roof damage from a named storm is a question of when, not if. The pattern after every event is the same: water gets in through compromised roofing, saturates the attic insulation, and the property owner doesn't discover it until ceiling stains appear or the smell starts three weeks later.
Wet insulation does not dry out in a Florida attic. It stays wet, it loses R-value permanently, it grows mold, and it holds odor. We do full vacuum extraction into sealed bags, sanitize the deck and framing, and install fresh material. If your Port St. John property took roof damage, have the attic looked at even if the ceiling looks fine.
Port St. John block walls and the forgotten surface
A large share of Port St. John construction is concrete block — CMU with interior furring strips and drywall, and empty air in between. Block has essentially no meaningful thermal resistance. A west-facing block wall in Port St. John absorbs sun all afternoon and keeps radiating heat into the room well past sunset.
Fi-Foil furring-strip reflective systems and injected foam both install into that cavity from the interior, don't cost you floor space, and deliver a real system R-value where there was almost none. On the west and south elevations of a Port St. John home, it's a difference you can feel with your hand on the drywall.
All Services in Port St. John
Every Type of Insulation Available in Port St. John, FL
Residential, commercial, and industrial — the complete envelope under one contractor.
🌬️
R-2.2 to R-3.8 per inch depending on material and settled density
Blown-In Insulation
Loose-fill fiberglass or cellulose blown to a consistent depth across attic floors.
Learn about Blown-In Insulation🧱
R-11 to R-38 depending on thickness
Batt Insulation
Pre-cut fiberglass or mineral wool batts fitted between studs, joists, and trusses.
Learn about Batt Insulation🪞
System R-values from R-4.1 to R-11 depending on assembly and air space
Fi-Foil Insulation
Reflective foil radiant barrier and vapor-retarder systems engineered for the Southeast.
Learn about Fi-Foil Insulation☀️
Reduces attic heat gain by up to 40% (radiant barriers are rated by emissivity, not R-value)
Radiant Barrier Insulation
Foil-faced sheathing or stapled-up barrier installed against the underside of the roof deck.
Learn about Radiant Barrier Insulation🧹
N/A — removal service
Insulation Removal
Complete vacuum extraction of contaminated, wet, rodent-damaged, or storm-damaged insulation.
Learn about Insulation Removal🏠
R-30 to R-49 recommended for Florida attics
Attic Insulation
Full attic systems: air sealing, baffles, deck or floor insulation, and depth verification.
Learn about Attic Insulation🧊
R-4.1 to R-21 depending on wall type
Wall Insulation
Cavity and masonry wall insulation for frame, block, and tilt-wall construction.
Learn about Wall Insulation🕳️
R-13 to R-19 typical
Crawl Space Insulation
Encapsulation, vapor barriers, and sub-floor or perimeter wall insulation.
Learn about Crawl Space Insulation🔇
R-15 to R-23 with STC ratings from 45 to 60+
Soundproofing Insulation
Acoustic mineral wool and dense fiberglass for STC-rated wall and ceiling assemblies.
Learn about Soundproofing Insulation🌡️
Specified per assembly
Thermal Insulation
Engineered thermal envelope systems for mechanical, process, and building applications.
Learn about Thermal Insulation🔥
Rated by hourly fire resistance, typically 1 to 4 hours
Fireproofing & Fire-Rated Insulation
Mineral wool, intumescent, and fire-rated assemblies meeting Florida Building Code.
Learn about Fireproofing & Fire-Rated Insulation🏭
R-10 to R-30 depending on system
Metal Building Insulation
Faced fiberglass blanket, banded liner systems, and closed-cell foam for pre-engineered steel.
Learn about Metal Building Insulation🏗️
Per approved energy calculation
New Construction Insulation
Full-scope insulation packages coordinated with your build schedule and energy calcs.
Learn about New Construction Insulation📊
N/A — diagnostic service
Energy Audits & Blower Door Testing
Diagnostic assessment of envelope leakage, duct leakage, and insulation performance.
Learn about Energy Audits & Blower Door TestingProperty Types
Who We Serve in Port St. John
🏡
Residential Insulation in Port St. John
Single-family homes, condos, townhomes, and multifamily. Retrofit and new construction.
Learn more🏢
Commercial Insulation in Port St. John
Offices, retail, restaurants, hotels, medical, schools, and mixed-use buildings.
Learn more🏭
Industrial Insulation in Port St. John
Warehouses, distribution centers, manufacturing, cold storage, hangars, and agricultural facilities.
Learn moreInsulation types in Port St. John
Every insulation type we install in Port St. John
Each one has its own Port St. John page with local pricing, Florida code requirements and FAQs.
Port St. John Insulation FAQs
How much does insulation cost in Port St. John, FL?
Most Port St. John attic insulation projects fall between $1.50 and $4.50 per square foot installed. A typical 2,000 sq ft Port St. John home runs roughly $2,200–$4,500 for a blown-in top-up to R-38, and $6,000–$13,000 for a full closed-cell spray foam roof deck encapsulation. Insulation removal adds about $1.00–$2.00 per square foot. Standard Insulation gives free, written, itemized estimates throughout Port St. John and Brevard County — call (561) 975-6204.
What R-value do I need in a Port St. John attic?
Port St. John falls in Florida Climate Zone 2 under the Florida Building Code, Energy Conservation (8th Edition). That means R-38 minimum for attics, with R-49 being the practical target for real comfort and utility savings. Many Port St. John homes built before 2005 are still measuring R-11 to R-19, which is a large part of why their summer bills are so high.
Do you offer spray foam insulation in Port St. John?
Yes. We install both open-cell and closed-cell spray foam throughout Port St. John, Brevard County. Closed-cell on the roof deck is the strongest option here — it air seals, controls humidity, brings your ducts into conditioned space, and adds measurable uplift resistance to your roof sheathing, which matters in a hurricane-exposed part of Florida.
How fast can you get to Port St. John?
We answer the phone 24 hours a day, 7 days a week. In Brevard County we can usually be on site for a free assessment within 24 to 48 hours, and emergency insulation removal after a roof leak or storm gets same-day priority whenever we can make it happen.
Do you handle commercial insulation in Port St. John?
Yes — offices, retail, restaurants, hotels, medical, warehouses, distribution, manufacturing, and cold storage throughout Port St. John and Brevard County. We carry envelope, mechanical, and fire-rated scopes, and we work nights and weekends in occupied buildings with containment and HEPA filtration.
Are you licensed and insured to work in Port St. John?
Yes. Standard Insulation is a licensed Florida insulation contractor carrying general liability and workers' compensation coverage, and we work throughout Port St. John and all of Brevard County. Certificates of insurance are provided to homeowners, general contractors, and property managers on request before any work begins.
Can insulation lower my electric bill in Port St. John?
Cooling is roughly half of a typical Port St. John electric bill. Bringing an under-insulated attic from R-11 up to a properly air-sealed R-38 commonly cuts the cooling portion by 20 to 30 percent — and more if your ductwork is in the attic and we add a radiant barrier. On a $300 summer bill that's usually $30 to $45 a month back in your pocket.
What is the best insulation for a Port St. John home?
It depends on your building and your budget, and we'll tell you honestly which one applies. If your attic is at R-13 and you want the most improvement per dollar, blown-in fiberglass to R-38 with proper air sealing is the answer. If your ducts are in the attic and you want humidity control and the biggest total comfort win, closed-cell spray foam on the roof deck is the answer. If your roof is more than twelve years old, do the roof first — we'll say so.
Free Insulation Estimate in Port St. John
No obligation, no charge. Call (561) 975-6204 — we're open 24/7.
Open 24/7 · 5827 Plunkett St, Hollywood, FL 33023 · bids@standard-insulation.com