🏠
R-30 to R-49 recommended for Florida attics
Attic Insulation
Full attic systems: air sealing, baffles, deck or floor insulation, and depth verification.
Learn about Attic Insulation- Home
- Services
Services
Every Type of Insulation, One Florida Contractor
Fifteen insulation services covering the complete building envelope — for residential, commercial, and industrial properties in all 67 Florida counties.
By Property Type
Residential · Commercial · Industrial
Different buildings, different physics, different crews. Pick your category to see the services that apply.
🏡 Residential Insulation
Single-family homes, condos, townhomes, and multifamily. Retrofit and new construction.
🌬️
R-2.2 to R-3.8 per inch depending on material and settled density
Blown-In Insulation
Loose-fill fiberglass or cellulose blown to a consistent depth across attic floors.
Learn about Blown-In Insulation🧴
R-3.7 (open-cell) to R-7.0 (closed-cell) per inch
Spray Foam Insulation
Open-cell and closed-cell polyurethane foam that air-seals and insulates in one application.
Learn about Spray Foam Insulation🧱
R-11 to R-38 depending on thickness
Batt Insulation
Pre-cut fiberglass or mineral wool batts fitted between studs, joists, and trusses.
Learn about Batt Insulation☀️
Reduces attic heat gain by up to 40% (radiant barriers are rated by emissivity, not R-value)
Radiant Barrier Insulation
Foil-faced sheathing or stapled-up barrier installed against the underside of the roof deck.
Learn about Radiant Barrier Insulation🪞
System R-values from R-4.1 to R-11 depending on assembly and air space
Fi-Foil Insulation
Reflective foil radiant barrier and vapor-retarder systems engineered for the Southeast.
Learn about Fi-Foil Insulation🏢 Commercial Insulation
Offices, retail, restaurants, hotels, medical, schools, and mixed-use buildings.
🧴
R-3.7 (open-cell) to R-7.0 (closed-cell) per inch
Spray Foam Insulation
Open-cell and closed-cell polyurethane foam that air-seals and insulates in one application.
Learn about Spray Foam Insulation🧱
R-11 to R-38 depending on thickness
Batt Insulation
Pre-cut fiberglass or mineral wool batts fitted between studs, joists, and trusses.
Learn about Batt Insulation🪞
System R-values from R-4.1 to R-11 depending on assembly and air space
Fi-Foil Insulation
Reflective foil radiant barrier and vapor-retarder systems engineered for the Southeast.
Learn about Fi-Foil Insulation🌡️
Specified per assembly
Thermal Insulation
Engineered thermal envelope systems for mechanical, process, and building applications.
Learn about Thermal Insulation🔥
Rated by hourly fire resistance, typically 1 to 4 hours
Fireproofing & Fire-Rated Insulation
Mineral wool, intumescent, and fire-rated assemblies meeting Florida Building Code.
Learn about Fireproofing & Fire-Rated Insulation🔇
R-15 to R-23 with STC ratings from 45 to 60+
Soundproofing Insulation
Acoustic mineral wool and dense fiberglass for STC-rated wall and ceiling assemblies.
Learn about Soundproofing Insulation🍷
R-19+ walls, R-30+ ceilings typical
Wine Cellar Insulation
Closed-cell foam, rigid board and vapor control for wine cellars, wine rooms and converted closets.
Learn about Wine Cellar Insulation🏭 Industrial Insulation
Warehouses, distribution centers, manufacturing, cold storage, hangars, and agricultural facilities.
📦
Closed-cell foam R-6 to R-7 per inch on the roof deck
Warehouse Insulation
Roof deck spray foam, liner systems, radiant barriers and dock-door sealing for warehouses and distribution centers.
Learn about Warehouse Insulation🏭
R-10 to R-30 depending on system
Metal Building Insulation
Faced fiberglass blanket, banded liner systems, and closed-cell foam for pre-engineered steel.
Learn about Metal Building Insulation🧴
R-3.7 (open-cell) to R-7.0 (closed-cell) per inch
Spray Foam Insulation
Open-cell and closed-cell polyurethane foam that air-seals and insulates in one application.
Learn about Spray Foam Insulation🌡️
Specified per assembly
Thermal Insulation
Engineered thermal envelope systems for mechanical, process, and building applications.
Learn about Thermal Insulation🔥
Rated by hourly fire resistance, typically 1 to 4 hours
Fireproofing & Fire-Rated Insulation
Mineral wool, intumescent, and fire-rated assemblies meeting Florida Building Code.
Learn about Fireproofing & Fire-Rated Insulation🧹
N/A — removal service
Insulation Removal
Complete vacuum extraction of contaminated, wet, rodent-damaged, or storm-damaged insulation.
Learn about Insulation Removal🏗️
Per approved energy calculation
New Construction Insulation
Full-scope insulation packages coordinated with your build schedule and energy calcs.
Learn about New Construction InsulationAll Services
Complete Insulation Service Catalog
🧴
R-3.7 (open-cell) to R-7.0 (closed-cell) per inch
Spray Foam Insulation
Open-cell and closed-cell polyurethane foam that air-seals and insulates in one application.
Learn about Spray Foam Insulation🌬️
R-2.2 to R-3.8 per inch depending on material and settled density
Blown-In Insulation
Loose-fill fiberglass or cellulose blown to a consistent depth across attic floors.
Learn about Blown-In Insulation🧱
R-11 to R-38 depending on thickness
Batt Insulation
Pre-cut fiberglass or mineral wool batts fitted between studs, joists, and trusses.
Learn about Batt Insulation🪞
System R-values from R-4.1 to R-11 depending on assembly and air space
Fi-Foil Insulation
Reflective foil radiant barrier and vapor-retarder systems engineered for the Southeast.
Learn about Fi-Foil Insulation☀️
Reduces attic heat gain by up to 40% (radiant barriers are rated by emissivity, not R-value)
Radiant Barrier Insulation
Foil-faced sheathing or stapled-up barrier installed against the underside of the roof deck.
Learn about Radiant Barrier Insulation🧹
N/A — removal service
Insulation Removal
Complete vacuum extraction of contaminated, wet, rodent-damaged, or storm-damaged insulation.
Learn about Insulation Removal🏠
R-30 to R-49 recommended for Florida attics
Attic Insulation
Full attic systems: air sealing, baffles, deck or floor insulation, and depth verification.
Learn about Attic Insulation🧊
R-4.1 to R-21 depending on wall type
Wall Insulation
Cavity and masonry wall insulation for frame, block, and tilt-wall construction.
Learn about Wall Insulation🕳️
R-13 to R-19 typical
Crawl Space Insulation
Encapsulation, vapor barriers, and sub-floor or perimeter wall insulation.
Learn about Crawl Space Insulation🔇
R-15 to R-23 with STC ratings from 45 to 60+
Soundproofing Insulation
Acoustic mineral wool and dense fiberglass for STC-rated wall and ceiling assemblies.
Learn about Soundproofing Insulation🌡️
Specified per assembly
Thermal Insulation
Engineered thermal envelope systems for mechanical, process, and building applications.
Learn about Thermal Insulation🔥
Rated by hourly fire resistance, typically 1 to 4 hours
Fireproofing & Fire-Rated Insulation
Mineral wool, intumescent, and fire-rated assemblies meeting Florida Building Code.
Learn about Fireproofing & Fire-Rated Insulation🏭
R-10 to R-30 depending on system
Metal Building Insulation
Faced fiberglass blanket, banded liner systems, and closed-cell foam for pre-engineered steel.
Learn about Metal Building Insulation🏗️
Per approved energy calculation
New Construction Insulation
Full-scope insulation packages coordinated with your build schedule and energy calcs.
Learn about New Construction Insulation📊
N/A — diagnostic service
Energy Audits & Blower Door Testing
Diagnostic assessment of envelope leakage, duct leakage, and insulation performance.
Learn about Energy Audits & Blower Door TestingInsulation Comparison at a Glance
| Service | R-Value / Rating | Best Applications |
|---|---|---|
| Spray Foam Insulation | R-3.7 (open-cell) to R-7.0 (closed-cell) per inch | Attics, roof decks, crawl spaces, rim joists, metal buildings, and any assembly where air sealing matters as much as R-value. |
| Blown-In Insulation | R-2.2 to R-3.8 per inch depending on material and settled density | Attic floors, over existing insulation, hard-to-reach cavities, and dense-pack wall retrofits. |
| Batt Insulation | R-11 to R-38 depending on thickness | New construction walls, interior sound walls, garage ceilings, floor systems, and unfinished attic joist bays. |
| Fi-Foil Insulation | System R-values from R-4.1 to R-11 depending on assembly and air space | Masonry block walls, attic roof decks, metal buildings, and concrete tilt-wall construction. |
| Radiant Barrier Insulation | Reduces attic heat gain by up to 40% (radiant barriers are rated by emissivity, not R-value) | Vented attics with ductwork or air handlers in the attic space. |
| Insulation Removal | N/A — removal service | Post-roof-leak remediation, rodent infestation cleanup, smoke or mold contamination, and pre-retrofit clearing. |
| Attic Insulation | R-30 to R-49 recommended for Florida attics | Any home with high summer cooling bills, uneven room temperatures, or original builder-grade insulation. |
| Wall Insulation | R-4.1 to R-21 depending on wall type | CMU block homes, wood-frame walls, retrofit dense-pack, and new construction. |
| Crawl Space Insulation | R-13 to R-19 typical | Elevated coastal homes, pier-and-beam construction, and stilt houses. |
| Soundproofing Insulation | R-15 to R-23 with STC ratings from 45 to 60+ | Home theaters, offices, multifamily demising walls, medical suites, and bedrooms on busy roads. |
| Thermal Insulation | Specified per assembly | Mechanical rooms, chilled water lines, ductwork, boilers, tanks, and process piping. |
| Fireproofing & Fire-Rated Insulation | Rated by hourly fire resistance, typically 1 to 4 hours | Commercial demising walls, shafts, structural steel, and occupancy separations. |
| Metal Building Insulation | R-10 to R-30 depending on system | Warehouses, hangars, agricultural buildings, and self-storage. |
| New Construction Insulation | Per approved energy calculation | Production builders, custom homes, and commercial ground-up projects. |
| Energy Audits & Blower Door Testing | N/A — diagnostic service | Homeowners with unexplained high bills, pre-purchase inspections, and code-required testing. |
Not sure which one you need? That's normal — and it's what the free assessment is for. We get in the attic, measure what's actually there, and tell you honestly whether you need a $2,000 top-up or a $12,000 encapsulation. Call (561) 975-6204.
One Call Covers the Whole Envelope
Attic, walls, crawl space, roof deck, mechanical. Free estimate anywhere in Florida.
Open 24/7 · 5827 Plunkett St, Hollywood, FL 33023 · bids@standard-insulation.com