🧴
R-3.7 (open-cell) to R-7.0 (closed-cell) per inch
Spray Foam Insulation
Open-cell and closed-cell polyurethane foam that air-seals and insulates in one application.
Learn about Spray Foam Insulation
49 Cities & Communities · Our Home County
Insulation Contractor in Palm Beach County, FL
Spray foam, blown-in, batt, Fi-Foil, radiant barrier, and insulation removal for every city in Palm Beach County — residential, commercial, and industrial.
Palm Beach County is our home turf and the county where we run our densest crew schedule. It is also one of the most varied building stocks in the state — 1950s CBS bungalows in West Palm Beach and Lake Worth Beach, 1970s and 80s tract homes across Boynton Beach and Greenacres, luxury coastal construction from Manalapan up through Jupiter Inlet Colony, sprawling newer communities in Wellington and Royal Palm Beach, and agricultural and commercial buildings out through Belle Glade and Pahokee. Each of those needs a different insulation approach, and we've done all of them.
Every city below has its own dedicated page covering local building stock, the insulation approach that works there, service pricing ranges, and answers to the questions Palm Beach County property owners actually ask.
Cities We Serve
Palm Beach County Insulation by City
- West Palm Beach Insulation
- Boca Raton Insulation
- Boynton Beach Insulation
- Delray Beach Insulation
- Jupiter Insulation
- Palm Beach Gardens Insulation
- Wellington Insulation
- Royal Palm Beach Insulation
- Lake Worth Beach Insulation
- Riviera Beach Insulation
- Greenacres Insulation
- Jupiter Farms Insulation
- Palm Springs Insulation
- North Palm Beach Insulation
- Lantana Insulation
- Loxahatchee Groves Insulation
- Belle Glade Insulation
- Pahokee Insulation
- South Bay Insulation
- Tequesta Insulation
- Juno Beach Insulation
- Palm Beach Insulation
- Manalapan Insulation
- Hypoluxo Insulation
- Ocean Ridge Insulation
- Gulf Stream Insulation
- Highland Beach Insulation
- Briny Breezes Insulation
- South Palm Beach Insulation
- Lake Clarke Shores Insulation
- Atlantis Insulation
- Cloud Lake Insulation
- Glen Ridge Insulation
- Haverhill Insulation
- Mangonia Park Insulation
- Westlake Insulation
- Lake Park Insulation
- Village of Golf Insulation
- Palm Beach Shores Insulation
- Jupiter Inlet Colony Insulation
- Acreage Insulation
- Century Village Insulation
- Lake Belvedere Estates Insulation
- Kings Point Insulation
- Schall Circle Insulation
- Stacey Street Insulation
- Limestone Creek Insulation
- Cabana Colony Insulation
- Jupiter Island Vicinity Insulation
Our Primary Service Area
Palm Beach County Is Where We Live
Densest crew coverage, fastest response, and the deepest local knowledge we have anywhere in Florida.
⚡
24–48 hour assessments
Free on-site assessment usually within two days anywhere from Boca Raton to Tequesta, and same-day emergency removal response after storms.
🏘️
We know the building stock
1950s CBS bungalows in West Palm Beach, 1980s tract homes in Boynton and Greenacres, coastal luxury from Manalapan to Jupiter Inlet Colony, and newer construction in Wellington and Westlake.
🌾
Glades and agricultural work
Metal buildings, packing houses, and agricultural facilities out through Belle Glade, Pahokee, and South Bay — different buildings, different physics, same standard.
49Palm Beach County cities served
24/7Phones answered
15+Insulation services
R-38Attic target
Services
All Insulation Services in Palm Beach County
🌬️
R-2.2 to R-3.8 per inch depending on material and settled density
Blown-In Insulation
Loose-fill fiberglass or cellulose blown to a consistent depth across attic floors.
Learn about Blown-In Insulation🧱
R-11 to R-38 depending on thickness
Batt Insulation
Pre-cut fiberglass or mineral wool batts fitted between studs, joists, and trusses.
Learn about Batt Insulation🪞
System R-values from R-4.1 to R-11 depending on assembly and air space
Fi-Foil Insulation
Reflective foil radiant barrier and vapor-retarder systems engineered for the Southeast.
Learn about Fi-Foil Insulation☀️
Reduces attic heat gain by up to 40% (radiant barriers are rated by emissivity, not R-value)
Radiant Barrier Insulation
Foil-faced sheathing or stapled-up barrier installed against the underside of the roof deck.
Learn about Radiant Barrier Insulation🧹
N/A — removal service
Insulation Removal
Complete vacuum extraction of contaminated, wet, rodent-damaged, or storm-damaged insulation.
Learn about Insulation Removal🏠
R-30 to R-49 recommended for Florida attics
Attic Insulation
Full attic systems: air sealing, baffles, deck or floor insulation, and depth verification.
Learn about Attic Insulation🧊
R-4.1 to R-21 depending on wall type
Wall Insulation
Cavity and masonry wall insulation for frame, block, and tilt-wall construction.
Learn about Wall Insulation🕳️
R-13 to R-19 typical
Crawl Space Insulation
Encapsulation, vapor barriers, and sub-floor or perimeter wall insulation.
Learn about Crawl Space Insulation🔇
R-15 to R-23 with STC ratings from 45 to 60+
Soundproofing Insulation
Acoustic mineral wool and dense fiberglass for STC-rated wall and ceiling assemblies.
Learn about Soundproofing Insulation🌡️
Specified per assembly
Thermal Insulation
Engineered thermal envelope systems for mechanical, process, and building applications.
Learn about Thermal Insulation🔥
Rated by hourly fire resistance, typically 1 to 4 hours
Fireproofing & Fire-Rated Insulation
Mineral wool, intumescent, and fire-rated assemblies meeting Florida Building Code.
Learn about Fireproofing & Fire-Rated Insulation🏭
R-10 to R-30 depending on system
Metal Building Insulation
Faced fiberglass blanket, banded liner systems, and closed-cell foam for pre-engineered steel.
Learn about Metal Building Insulation🏗️
Per approved energy calculation
New Construction Insulation
Full-scope insulation packages coordinated with your build schedule and energy calcs.
Learn about New Construction Insulation📊
N/A — diagnostic service
Energy Audits & Blower Door Testing
Diagnostic assessment of envelope leakage, duct leakage, and insulation performance.
Learn about Energy Audits & Blower Door TestingInsulation types in Palm Beach County
Every insulation type we install in Palm Beach County
Each one has its own Palm Beach County page with local pricing, Florida code requirements and FAQs.
Palm Beach County Insulation FAQs
What cities do you serve in Palm Beach County?
All of them — West Palm Beach, Boca Raton, Boynton Beach, Delray Beach, Jupiter, Palm Beach Gardens, Wellington, Royal Palm Beach and more. Every city and community in Palm Beach County has a dedicated insulation page on this site with local details.
How much does insulation cost in Palm Beach County?
Most Palm Beach County attic projects run $1.50–$4.50 per square foot installed. A 2,000 sq ft home is typically $2,200–$4,500 for a blown-in top-up to R-38, or $6,000–$13,000 for closed-cell spray foam roof deck encapsulation. Free written estimates throughout the county — (561) 975-6204.
What insulation R-value is required in Palm Beach County?
Palm Beach County is in Florida Climate Zone 1, requiring R-30 minimum in attics under the Florida Building Code, Energy Conservation (8th Edition). R-38 is the practical target for comfort and utility savings.
Do you serve commercial and industrial buildings in Palm Beach County?
Yes — offices, retail, hospitality, medical, warehouses, distribution, manufacturing, cold storage, and agricultural buildings throughout Palm Beach County. Envelope, mechanical, and fire-rated scopes all under one contractor.
Free Estimate Anywhere in Palm Beach County
Open 24/7. Call (561) 975-6204 or request an estimate online.
Open 24/7 · 5827 Plunkett St, Hollywood, FL 33023 · bids@standard-insulation.com