🧴
R-3.7 (open-cell) to R-7.0 (closed-cell) per inch
Spray Foam Insulation
Open-cell and closed-cell polyurethane foam that air-seals and insulates in one application.
Learn about Spray Foam Insulation
67 Cities & Communities
Insulation Contractor in Miami-Dade County, FL
Spray foam, blown-in, batt, Fi-Foil, radiant barrier, and insulation removal for every city in Miami-Dade County — residential, commercial, and industrial.
Miami-Dade is HVHZ territory with the strictest product approval requirements in the state, and it is Climate Zone 1 across much of the county — the hottest and most humid conditions Florida produces. Between the high-rise condo stock, the enormous industrial corridor around Medley and Doral, and the older single-family neighborhoods, the range of insulation work here is as wide as anywhere we operate.
Every city below has its own dedicated page covering local building stock, the insulation approach that works there, service pricing ranges, and answers to the questions Miami-Dade County property owners actually ask.
Cities We Serve
Miami-Dade County Insulation by City
- Miami Insulation
- Hialeah Insulation
- Miami Gardens Insulation
- Miami Beach Insulation
- Homestead Insulation
- North Miami Insulation
- Coral Gables Insulation
- Doral Insulation
- North Miami Beach Insulation
- Cutler Bay Insulation
- Aventura Insulation
- Miami Lakes Insulation
- Palmetto Bay Insulation
- Hialeah Gardens Insulation
- Sunny Isles Beach Insulation
- Opa-locka Insulation
- Miami Springs Insulation
- Sweetwater Insulation
- Key Biscayne Insulation
- Florida City Insulation
- South Miami Insulation
- Pinecrest Insulation
- Bal Harbour Insulation
- Surfside Insulation
- North Bay Village Insulation
- Bay Harbor Islands Insulation
- West Miami Insulation
- Biscayne Park Insulation
- El Portal Insulation
- Golden Beach Insulation
- Indian Creek Insulation
- Medley Insulation
- Virginia Gardens Insulation
- Islandia Insulation
- Kendall Insulation
- Westchester Insulation
- The Hammocks Insulation
- Tamiami Insulation
- Fontainebleau Insulation
- Country Club Insulation
- Richmond West Insulation
- The Crossings Insulation
- Three Lakes Insulation
- Coral Terrace Insulation
- Glenvar Heights Insulation
- Olympia Heights Insulation
- Sunset Insulation
- South Miami Heights Insulation
- Leisure City Insulation
- Naranja Insulation
- Princeton Insulation
- Goulds Insulation
- Perrine Insulation
- Ives Estates Insulation
- Ojus Insulation
- Uleta Insulation
- Brownsville Insulation
- Gladeview Insulation
- Pinewood Insulation
- West Little River Insulation
- Westview Insulation
- Palm Springs North Insulation
- Country Walk Insulation
- Kendale Lakes Insulation
- Kendall West Insulation
- University Park Insulation
- Sunny Isles Insulation
Services
All Insulation Services in Miami-Dade County
🌬️
R-2.2 to R-3.8 per inch depending on material and settled density
Blown-In Insulation
Loose-fill fiberglass or cellulose blown to a consistent depth across attic floors.
Learn about Blown-In Insulation🧱
R-11 to R-38 depending on thickness
Batt Insulation
Pre-cut fiberglass or mineral wool batts fitted between studs, joists, and trusses.
Learn about Batt Insulation🪞
System R-values from R-4.1 to R-11 depending on assembly and air space
Fi-Foil Insulation
Reflective foil radiant barrier and vapor-retarder systems engineered for the Southeast.
Learn about Fi-Foil Insulation☀️
Reduces attic heat gain by up to 40% (radiant barriers are rated by emissivity, not R-value)
Radiant Barrier Insulation
Foil-faced sheathing or stapled-up barrier installed against the underside of the roof deck.
Learn about Radiant Barrier Insulation🧹
N/A — removal service
Insulation Removal
Complete vacuum extraction of contaminated, wet, rodent-damaged, or storm-damaged insulation.
Learn about Insulation Removal🏠
R-30 to R-49 recommended for Florida attics
Attic Insulation
Full attic systems: air sealing, baffles, deck or floor insulation, and depth verification.
Learn about Attic Insulation🧊
R-4.1 to R-21 depending on wall type
Wall Insulation
Cavity and masonry wall insulation for frame, block, and tilt-wall construction.
Learn about Wall Insulation🕳️
R-13 to R-19 typical
Crawl Space Insulation
Encapsulation, vapor barriers, and sub-floor or perimeter wall insulation.
Learn about Crawl Space Insulation🔇
R-15 to R-23 with STC ratings from 45 to 60+
Soundproofing Insulation
Acoustic mineral wool and dense fiberglass for STC-rated wall and ceiling assemblies.
Learn about Soundproofing Insulation🌡️
Specified per assembly
Thermal Insulation
Engineered thermal envelope systems for mechanical, process, and building applications.
Learn about Thermal Insulation🔥
Rated by hourly fire resistance, typically 1 to 4 hours
Fireproofing & Fire-Rated Insulation
Mineral wool, intumescent, and fire-rated assemblies meeting Florida Building Code.
Learn about Fireproofing & Fire-Rated Insulation🏭
R-10 to R-30 depending on system
Metal Building Insulation
Faced fiberglass blanket, banded liner systems, and closed-cell foam for pre-engineered steel.
Learn about Metal Building Insulation🏗️
Per approved energy calculation
New Construction Insulation
Full-scope insulation packages coordinated with your build schedule and energy calcs.
Learn about New Construction Insulation📊
N/A — diagnostic service
Energy Audits & Blower Door Testing
Diagnostic assessment of envelope leakage, duct leakage, and insulation performance.
Learn about Energy Audits & Blower Door TestingInsulation types in Miami-Dade County
Every insulation type we install in Miami-Dade County
Each one has its own Miami-Dade County page with local pricing, Florida code requirements and FAQs.
Miami-Dade County Insulation FAQs
What cities do you serve in Miami-Dade County?
All of them — Miami, Hialeah, Miami Gardens, Miami Beach, Homestead, North Miami, Coral Gables, Doral and more. Every city and community in Miami-Dade County has a dedicated insulation page on this site with local details.
How much does insulation cost in Miami-Dade County?
Most Miami-Dade County attic projects run $1.50–$4.50 per square foot installed. A 2,000 sq ft home is typically $2,200–$4,500 for a blown-in top-up to R-38, or $6,000–$13,000 for closed-cell spray foam roof deck encapsulation. Free written estimates throughout the county — (561) 975-6204.
What insulation R-value is required in Miami-Dade County?
Miami-Dade County is in Florida Climate Zone 1, requiring R-30 minimum in attics under the Florida Building Code, Energy Conservation (8th Edition). R-38 is the practical target for comfort and utility savings.
Do you serve commercial and industrial buildings in Miami-Dade County?
Yes — offices, retail, hospitality, medical, warehouses, distribution, manufacturing, cold storage, and agricultural buildings throughout Miami-Dade County. Envelope, mechanical, and fire-rated scopes all under one contractor.
Free Estimate Anywhere in Miami-Dade County
Open 24/7. Call (561) 975-6204 or request an estimate online.
Open 24/7 · 5827 Plunkett St, Hollywood, FL 33023 · bids@standard-insulation.com