🧴
R-3.7 (open-cell) to R-7.0 (closed-cell) per inch
Spray Foam Insulation
Open-cell and closed-cell polyurethane foam that air-seals and insulates in one application.
Learn about Spray Foam Insulation
Rated by hourly fire resistance, typically 1 to 4 hours
Fireproofing & Fire-Rated Insulation in Florida
Mineral wool, intumescent, and fire-rated assemblies meeting Florida Building Code.
Commercial fireproofing: see our dedicated warehouse fireproofing and commercial property fireproofing pages, or the fireproofing overview.
Quick facts: R-value: Rated by hourly fire resistance, typically 1 to 4 hours · Best for: Commercial demising walls, shafts, structural steel, and occupancy separations.
Available for: Commercial InsulationIndustrial Insulation
Available for: Commercial InsulationIndustrial Insulation
Fire-rated assemblies aren't optional — they're inspected. We install to the listed assembly so it passes the first time.
Rated assemblies are built to the listing, exactly
A fire-rated assembly is only rated if it's built the way it was tested. Substituting a material, changing a fastener spacing, or omitting a component voids the listing — and the inspector will catch it, or worse, it won't perform in an actual fire.
We keep the UL or similar listing documentation on site with the crew, install to the exact detail, and hand over the documentation at closeout.
Mineral wool firesafing and joint systems
Perimeter fire containment at the slab edge, head-of-wall joints, and through-penetration firestopping all rely on mineral wool compressed to specified density plus the correct sealant. Compression ratio matters. Depth matters. We measure both rather than eyeballing them.
Structural steel protection
Sprayed fire-resistive materials on structural steel are applied to a specified thickness based on the member's weight-to-heated-perimeter ratio and the required hourly rating. Thickness gets measured and documented at the specified frequency — that documentation is what the inspector actually reviews.
Shaft walls, demising walls, and occupancy separations
Commercial and multifamily construction is full of rated separations: between units, between occupancies, around stairs and elevator shafts, around mechanical rooms. Each has a required rating and a listed assembly. We coordinate these with the framing and drywall trades so the sequence works and nothing has to be opened back up.
Why Florida homeowners and builders choose Standard Insulation
- Licensed and fully insured Florida insulation contractor
- Open 24 hours a day, 7 days a week — a real person answers
- Free written, itemized estimates with options priced side by side
- Owner-operated by Dylan Cecere, who still walks jobs personally
- Every city in all 67 Florida counties, with our densest coverage in Palm Beach County
- Clean job sites, containment, and a walkthrough before we leave
Also Consider
Related Insulation Services
🌬️
R-2.2 to R-3.8 per inch depending on material and settled density
Blown-In Insulation
Loose-fill fiberglass or cellulose blown to a consistent depth across attic floors.
Learn about Blown-In Insulation🧱
R-11 to R-38 depending on thickness
Batt Insulation
Pre-cut fiberglass or mineral wool batts fitted between studs, joists, and trusses.
Learn about Batt Insulation🪞
System R-values from R-4.1 to R-11 depending on assembly and air space
Fi-Foil Insulation
Reflective foil radiant barrier and vapor-retarder systems engineered for the Southeast.
Learn about Fi-Foil Insulation☀️
Reduces attic heat gain by up to 40% (radiant barriers are rated by emissivity, not R-value)
Radiant Barrier Insulation
Foil-faced sheathing or stapled-up barrier installed against the underside of the roof deck.
Learn about Radiant Barrier Insulation🧹
N/A — removal service
Insulation Removal
Complete vacuum extraction of contaminated, wet, rodent-damaged, or storm-damaged insulation.
Learn about Insulation RemovalPalm Beach County
Fireproofing & Fire-Rated Insulation Near You
Our primary service area. Every city has a dedicated page.
- Fireproofing & Fire-Rated Insulation in West Palm Beach
- Fireproofing & Fire-Rated Insulation in Boca Raton
- Fireproofing & Fire-Rated Insulation in Boynton Beach
- Fireproofing & Fire-Rated Insulation in Delray Beach
- Fireproofing & Fire-Rated Insulation in Jupiter
- Fireproofing & Fire-Rated Insulation in Palm Beach Gardens
- Fireproofing & Fire-Rated Insulation in Wellington
- Fireproofing & Fire-Rated Insulation in Royal Palm Beach
- Fireproofing & Fire-Rated Insulation in Lake Worth Beach
- Fireproofing & Fire-Rated Insulation in Riviera Beach
- Fireproofing & Fire-Rated Insulation in Greenacres
- Fireproofing & Fire-Rated Insulation in Jupiter Farms
Fireproofing & Fire-Rated Insulation FAQs
How much does fireproofing & fire-rated insulation cost in Florida?
Fireproofing & Fire-Rated Insulation pricing varies with square footage, access, existing conditions, and whether removal is required first. Most Florida projects fall in the $1.50–$5.00 per square foot installed range. Standard Insulation provides free written, itemized estimates statewide — call (561) 975-6204.
What R-value does fireproofing & fire-rated insulation provide?
Rated by hourly fire resistance, typically 1 to 4 hours. In Florida's Climate Zone 1 attic assemblies must reach R-30, and in Climate Zone 2 R-38, with R-49 a common practical target, and we'll size the assembly to hit your code requirement or your performance goal.
Is fireproofing & fire-rated insulation a good choice for a Florida building?
Fire-rated assemblies aren't optional — they're inspected. We install to the listed assembly so it passes the first time.
Where is fireproofing & fire-rated insulation typically installed?
Commercial demising walls, shafts, structural steel, and occupancy separations.
Do you install fireproofing & fire-rated insulation in Palm Beach County?
Yes — Palm Beach County is our core service area. We install fireproofing & fire-rated insulation in West Palm Beach, Boca Raton, Boynton Beach, Delray Beach, Jupiter, Wellington, Palm Beach Gardens and every other city in the county, plus all 67 Florida counties statewide.
Are you licensed and insured?
Yes. Standard Insulation is a licensed and fully insured Florida insulation contractor carrying general liability and workers' compensation. Certificates of insurance are available on request before work begins.
Free Fireproofing & Fire-Rated Insulation Estimate
No obligation. Anywhere in Florida. Open 24/7 — call (561) 975-6204.
Open 24/7 · 5827 Plunkett St, Hollywood, FL 33023 · bids@standard-insulation.com