Palm Beach County · South Florida

Insulation Contractor in Wellington, FL

Spray foam, blown-in, batt, Fi-Foil, radiant barrier, and insulation removal for Wellington homes, businesses, and industrial buildings. Licensed, insured, and open 24/7.

  • Serving all of Wellington
  • Free written estimates
  • Open 24/7
  • Licensed & insured

Standard Insulation works throughout Wellington, Palm Beach County, installing the full range of insulation systems that actually make sense in South Florida. The building stock in Wellington spans several decades of construction practice, and the insulation situation we find varies enormously from one street to the next — but the pattern is consistent: under-depth attics, unsealed ceiling planes, and ductwork baking in a superheated attic.

Air sealing comes before insulation in Wellington

This is the part most Wellington homeowners have never had explained to them. Insulation resists heat conduction. It does absolutely nothing to stop air from moving through it. If we blow R-38 over a ceiling full of unsealed recessed light housings, plumbing penetrations, top plates, and an uninsulated attic hatch, you have paid for R-38 and you will experience something considerably less.

On every Wellington job we seal the ceiling plane first — penetrations foamed, can lights covered or replaced with airtight housings, the attic hatch weatherstripped and insulated, and bath fans verified to actually terminate outside rather than dumping humid air into the attic. Then we insulate. It adds a few hours and it changes the result substantially.

Rodents, and why insulation alone doesn't solve it

Rodent-contaminated attic insulation is common across Wellington and throughout Palm Beach County, particularly in older construction with soffit gaps and aging vent screens. Urine and droppings make the material a health issue on top of a performance issue, and no amount of new insulation on top of it fixes anything.

We remove and sanitize, and just as importantly we identify the entry points while we're up there — soffit gaps, roof-to-wall junctions, plumbing stacks, damaged vent screens — so you or your pest professional can close them. Removal without exclusion means you'll be doing this again in eighteen months.

Commercial and industrial work in Wellington

We handle commercial and industrial insulation across Wellington and Palm Beach County — offices, retail, restaurants, hotels, medical suites, warehouses, distribution, manufacturing, and cold storage.

That includes building envelope, mechanical and thermal insulation on ductwork and piping, chilled water condensation control, fire-rated assemblies built to the listed detail, and metal building systems. Carrying all three scopes under one contractor eliminates the interface gaps that cause most failed inspections. Occupied buildings in Wellington get night and weekend crews with containment and HEPA filtration.

All Services in Wellington

Every Type of Insulation Available in Wellington, FL

Residential, commercial, and industrial — the complete envelope under one contractor.

Property Types

Who We Serve in Wellington

Insulation types in Wellington

Every insulation type we install in Wellington

Each one has its own Wellington page with local pricing, Florida code requirements and FAQs.

Wellington Insulation FAQs

How much does insulation cost in Wellington, FL?

Most Wellington attic insulation projects fall between $1.50 and $4.50 per square foot installed. A typical 2,000 sq ft Wellington home runs roughly $2,200–$4,500 for a blown-in top-up to R-38, and $6,000–$13,000 for a full closed-cell spray foam roof deck encapsulation. Insulation removal adds about $1.00–$2.00 per square foot. Standard Insulation gives free, written, itemized estimates throughout Wellington and Palm Beach County — call (561) 975-6204.

What R-value do I need in a Wellington attic?

Wellington falls in Florida Climate Zone 1 under the Florida Building Code, Energy Conservation (8th Edition). That means R-30 minimum for attics, with R-38 being the practical target for real comfort and utility savings. Many Wellington homes built before 2005 are still measuring R-11 to R-19, which is a large part of why their summer bills are so high.

Do you offer spray foam insulation in Wellington?

Yes. We install both open-cell and closed-cell spray foam throughout Wellington, Palm Beach County. Closed-cell on the roof deck is the strongest option here — it air seals, controls humidity, brings your ducts into conditioned space, and adds measurable uplift resistance to your roof sheathing, which matters in a hurricane-exposed part of Florida.

How fast can you get to Wellington?

We answer the phone 24 hours a day, 7 days a week. In Palm Beach County we can usually be on site for a free assessment within 24 to 48 hours, and emergency insulation removal after a roof leak or storm gets same-day priority whenever we can make it happen.

Do you handle commercial insulation in Wellington?

Yes — offices, retail, restaurants, hotels, medical, warehouses, distribution, manufacturing, and cold storage throughout Wellington and Palm Beach County. We carry envelope, mechanical, and fire-rated scopes, and we work nights and weekends in occupied buildings with containment and HEPA filtration.

Are you licensed and insured to work in Wellington?

Yes. Standard Insulation is a licensed Florida insulation contractor carrying general liability and workers' compensation coverage, and we work throughout Wellington and all of Palm Beach County. Certificates of insurance are provided to homeowners, general contractors, and property managers on request before any work begins.

Can insulation lower my electric bill in Wellington?

Cooling is roughly half of a typical Wellington electric bill. Bringing an under-insulated attic from R-11 up to a properly air-sealed R-38 commonly cuts the cooling portion by 20 to 30 percent — and more if your ductwork is in the attic and we add a radiant barrier. On a $300 summer bill that's usually $30 to $45 a month back in your pocket.

What is the best insulation for a Wellington home?

It depends on your building and your budget, and we'll tell you honestly which one applies. If your attic is at R-13 and you want the most improvement per dollar, blown-in fiberglass to R-38 with proper air sealing is the answer. If your ducts are in the attic and you want humidity control and the biggest total comfort win, closed-cell spray foam on the roof deck is the answer. If your roof is more than twelve years old, do the roof first — we'll say so.

Get Your Free Insulation Estimate

Answer 6 quick questions. We call back fast — we're open 24/7. No pressure, no obligation, no charge for the estimate.

1 · Where is the job?
We serve every city in all 67 Florida counties.
2 · What kind of property?
3 · Which insulation services do you need? *

Prefer to talk? Call (561) 975-6204 — we answer 24/7. Or email bids@standard-insulation.com.

Free Insulation Estimate in Wellington

No obligation, no charge. Call (561) 975-6204 — we're open 24/7.

Open 24/7 · 5827 Plunkett St, Hollywood, FL 33023 · bids@standard-insulation.com

📞 Contact Us Now 💬 Free Estimate
📞 Contact Us Now 💬 Free Estimate