Insulation for Belle Glade homes
Belle Glade is a great place to live and a hard place to keep cool. Between Lake Okeechobee and the Belle Glade Marina, the roofs we climb under share one problem — an attic that is far hotter than it needs to be and far less insulated than it should be.
Most of what we see in Belle Glade is rural homes, ranch properties, agricultural and metal buildings where heat and humidity hit the hardest. Long, uninterrupted sun, open land and plenty of metal roofs mean heat gain and condensation dominate, and many buildings — barns, shops, agricultural structures — were never insulated at all.
Closed-cell spray foam is our usual answer on metal buildings because it insulates and stops condensation in one layer; homes get blown attics, radiant barrier and sealed ducts.
What we install in Belle Glade
Every system below has its own Belle Glade page with local notes, pricing and FAQs.
Code, climate & rebates
Belle Glade homes are built and inspected under the Florida Building Code. For energy purposes all of Palm Beach County is Climate Zone 1, where the prescriptive minimum for ceilings is R-30. We design to R-38 because real attics settle, get walked on and run thin at the eaves. Palm Beach County sits outside the High-Velocity Hurricane Zone, but wind-borne debris rules still apply along the coast, and we treat every roof-deck job with the same care.
Electric service in Belle Glade comes from Florida Power & Light (FPL). Insulation incentives change, so we check current programs before quoting — start with Florida Power & Light (FPL). For permits tied to remodels, additions or re-roofs, see the Palm Beach County government. You can confirm any contractor's license on the Florida DBPR license search.
Belle Glade insulation pricing
| System | Typical installed range |
|---|---|
| Blown fiberglass to R-38 (incl. air sealing) | $1.10–$1.90 / sq ft |
| Insulation removal (vacuum extraction) | $1.00–$2.00 / sq ft |
| Radiant barrier on rafters | $0.60–$1.40 / sq ft |
| Open-cell spray foam, roof deck | $2.20–$3.75 / sq ft |
| Closed-cell spray foam | $3.50–$6.50 / sq ft |
| Batts in open framing | $0.90–$1.80 / sq ft |
Typical Belle Glade ranges for 2026. Your written estimate is based on measured square footage, access, existing conditions and the system you choose.
How a Belle Glade job runs
- Call or send the form. We answer 24/7 and book a visit — usually within 24–48 hours in Belle Glade.
- Attic assessment. Depth, moisture, rodents, ducts, ventilation and air leaks — photographed.
- Written options. Systems, R-values and prices side by side.
- Install day. Containment, air sealing, insulation to measured depth, depth markers.
- Walkthrough. Photos and paperwork for your records, HOA or inspector.
Every Belle Glade job ends with depth markers, photos and a walkthrough. If something in the attic needs a roofer, a pest company or an electrician first, we will tell you — before you spend money on insulation.
From Belle Glade to our office
We are based at 5827 Plunkett St, Hollywood, FL 33023. Here is the route from Belle Glade: