Insulation Contractor in Moore Haven, FL

Most Moore Haven attic insulation projects fall between $1.50 and $4.50 per square foot installed. A typical 2,000 sq ft Moore Haven home runs roughly $2,200–$4,500 for a blown-in top-up to R-38, and $6,000–$13,000 for a full closed-cell spray foam roof deck encapsulation. Insulation removal adds about $1.00–$2.00 per square foot. Standard Insulation gives free, written, itemized estimates throughout Moore Haven and Glades County — call (561) 975-6204.

Moore Haven falls in Florida Climate Zone 2 under the Florida Building Code, Energy Conservation (8th Edition). That means R-38 minimum for attics, with R-49 being the practical target for real comfort and utility savings. Many Moore Haven homes built before 2005 are still measuring R-11 to R-19, which is a large part of why their summer bills are so high.

Yes. We install both open-cell and closed-cell spray foam throughout Moore Haven, Glades County. Closed-cell on the roof deck is the strongest option here — it air seals, controls humidity, brings your ducts into conditioned space, and adds measurable uplift resistance to your roof sheathing, which matters in a hurricane-exposed part of Florida.

We answer the phone 24 hours a day, 7 days a week. In Glades County we can usually be on site for a free assessment within 24 to 48 hours, and emergency insulation removal after a roof leak or storm gets same-day priority whenever we can make it happen.

Yes — offices, retail, restaurants, hotels, medical, warehouses, distribution, manufacturing, and cold storage throughout Moore Haven and Glades County. We carry envelope, mechanical, and fire-rated scopes, and we work nights and weekends in occupied buildings with containment and HEPA filtration.

Yes. Standard Insulation is a licensed Florida insulation contractor carrying general liability and workers' compensation coverage, and we work throughout Moore Haven and all of Glades County. Certificates of insurance are provided to homeowners, general contractors, and property managers on request before any work begins.

Cooling is roughly half of a typical Moore Haven electric bill. Bringing an under-insulated attic from R-11 up to a properly air-sealed R-38 commonly cuts the cooling portion by 20 to 30 percent — and more if your ductwork is in the attic and we add a radiant barrier. On a $300 summer bill that's usually $30 to $45 a month back in your pocket.

It depends on your building and your budget, and we'll tell you honestly which one applies. If your attic is at R-13 and you want the most improvement per dollar, blown-in fiberglass to R-38 with proper air sealing is the answer. If your ducts are in the attic and you want humidity control and the biggest total comfort win, closed-cell spray foam on the roof deck is the answer. If your roof is more than twelve years old, do the roof first — we'll say so.