Spray Foam Insulation
Open-cell and closed-cell polyurethane foam that air-seals and insulates in one application.
Learn about Spray Foam InsulationSpray foam, blown-in, batt, Fi-Foil, radiant barrier, and insulation removal for Eglin AFB homes, businesses, and industrial buildings. Licensed, insured, and open 24/7.
If you own a home or a building in Eglin AFB, your insulation is doing more work than almost anything else in the structure — and in most Eglin AFB buildings we assess, it is not doing it well. Eglin AFB sits in the Florida Panhandle, in Okaloosa County, where summer attic temperatures routinely climb past 130 degrees and the air outside is carrying enough moisture that every gap in your ceiling plane is pumping humidity into your living space.
In a large share of Eglin AFB homes, the air handler and the entire duct system sit in a vented attic that hits 135 degrees in August. That means every foot of duct is losing capacity, and any leakage in the supply side is dumping conditioned air into an attic while the return side pulls superheated, humid attic air into your house.
When we find that situation in Eglin AFB, the conversation usually turns to either a radiant barrier plus a heavy attic top-up, or a closed-cell spray foam roof deck encapsulation that brings the entire attic — ducts and all — inside the conditioned envelope. The second option costs more and does more.
Rodent-contaminated attic insulation is common across Eglin AFB and throughout Okaloosa County, particularly in older construction with soffit gaps and aging vent screens. Urine and droppings make the material a health issue on top of a performance issue, and no amount of new insulation on top of it fixes anything.
We remove and sanitize, and just as importantly we identify the entry points while we're up there — soffit gaps, roof-to-wall junctions, plumbing stacks, damaged vent screens — so you or your pest professional can close them. Removal without exclusion means you'll be doing this again in eighteen months.
We handle commercial and industrial insulation across Eglin AFB and Okaloosa County — offices, retail, restaurants, hotels, medical suites, warehouses, distribution, manufacturing, and cold storage.
That includes building envelope, mechanical and thermal insulation on ductwork and piping, chilled water condensation control, fire-rated assemblies built to the listed detail, and metal building systems. Carrying all three scopes under one contractor eliminates the interface gaps that cause most failed inspections. Occupied buildings in Eglin AFB get night and weekend crews with containment and HEPA filtration.
Residential, commercial, and industrial — the complete envelope under one contractor.
Open-cell and closed-cell polyurethane foam that air-seals and insulates in one application.
Learn about Spray Foam InsulationLoose-fill fiberglass or cellulose blown to a consistent depth across attic floors.
Learn about Blown-In InsulationPre-cut fiberglass or mineral wool batts fitted between studs, joists, and trusses.
Learn about Batt InsulationReflective foil radiant barrier and vapor-retarder systems engineered for the Southeast.
Learn about Fi-Foil InsulationFoil-faced sheathing or stapled-up barrier installed against the underside of the roof deck.
Learn about Radiant Barrier InsulationComplete vacuum extraction of contaminated, wet, rodent-damaged, or storm-damaged insulation.
Learn about Insulation RemovalFull attic systems: air sealing, baffles, deck or floor insulation, and depth verification.
Learn about Attic InsulationCavity and masonry wall insulation for frame, block, and tilt-wall construction.
Learn about Wall InsulationEncapsulation, vapor barriers, and sub-floor or perimeter wall insulation.
Learn about Crawl Space InsulationAcoustic mineral wool and dense fiberglass for STC-rated wall and ceiling assemblies.
Learn about Soundproofing InsulationEngineered thermal envelope systems for mechanical, process, and building applications.
Learn about Thermal InsulationMineral wool, intumescent, and fire-rated assemblies meeting Florida Building Code.
Learn about Fireproofing & Fire-Rated InsulationFaced fiberglass blanket, banded liner systems, and closed-cell foam for pre-engineered steel.
Learn about Metal Building InsulationFull-scope insulation packages coordinated with your build schedule and energy calcs.
Learn about New Construction InsulationDiagnostic assessment of envelope leakage, duct leakage, and insulation performance.
Learn about Energy Audits & Blower Door TestingSingle-family homes, condos, townhomes, and multifamily. Retrofit and new construction.
Learn moreOffices, retail, restaurants, hotels, medical, schools, and mixed-use buildings.
Learn moreWarehouses, distribution centers, manufacturing, cold storage, hangars, and agricultural facilities.
Learn moreEach one has its own Eglin AFB page with local pricing, Florida code requirements and FAQs.
Most Eglin AFB attic insulation projects fall between $1.50 and $4.50 per square foot installed. A typical 2,000 sq ft Eglin AFB home runs roughly $2,200–$4,500 for a blown-in top-up to R-38, and $6,000–$13,000 for a full closed-cell spray foam roof deck encapsulation. Insulation removal adds about $1.00–$2.00 per square foot. Standard Insulation gives free, written, itemized estimates throughout Eglin AFB and Okaloosa County — call (561) 975-6204.
Eglin AFB falls in Florida Climate Zone 2 under the Florida Building Code, Energy Conservation (8th Edition). That means R-38 minimum for attics, with R-49 being the practical target for real comfort and utility savings. Many Eglin AFB homes built before 2005 are still measuring R-11 to R-19, which is a large part of why their summer bills are so high.
Yes. We install both open-cell and closed-cell spray foam throughout Eglin AFB, Okaloosa County. Closed-cell on the roof deck is the strongest option here — it air seals, controls humidity, brings your ducts into conditioned space, and adds measurable uplift resistance to your roof sheathing, which matters in a hurricane-exposed part of Florida.
We answer the phone 24 hours a day, 7 days a week. In Okaloosa County we can usually be on site for a free assessment within 24 to 48 hours, and emergency insulation removal after a roof leak or storm gets same-day priority whenever we can make it happen.
Yes — offices, retail, restaurants, hotels, medical, warehouses, distribution, manufacturing, and cold storage throughout Eglin AFB and Okaloosa County. We carry envelope, mechanical, and fire-rated scopes, and we work nights and weekends in occupied buildings with containment and HEPA filtration.
Yes. Standard Insulation is a licensed Florida insulation contractor carrying general liability and workers' compensation coverage, and we work throughout Eglin AFB and all of Okaloosa County. Certificates of insurance are provided to homeowners, general contractors, and property managers on request before any work begins.
Cooling is roughly half of a typical Eglin AFB electric bill. Bringing an under-insulated attic from R-11 up to a properly air-sealed R-38 commonly cuts the cooling portion by 20 to 30 percent — and more if your ductwork is in the attic and we add a radiant barrier. On a $300 summer bill that's usually $30 to $45 a month back in your pocket.
It depends on your building and your budget, and we'll tell you honestly which one applies. If your attic is at R-13 and you want the most improvement per dollar, blown-in fiberglass to R-38 with proper air sealing is the answer. If your ducts are in the attic and you want humidity control and the biggest total comfort win, closed-cell spray foam on the roof deck is the answer. If your roof is more than twelve years old, do the roof first — we'll say so.
No obligation, no charge. Call (561) 975-6204 — we're open 24/7.
Open 24/7 · 5827 Plunkett St, Hollywood, FL 33023 · bids@standard-insulation.com