Martin County · South Florida

Insulation Contractor in Port Salerno, FL

Spray foam, blown-in, batt, Fi-Foil, radiant barrier, and insulation removal for Port Salerno homes, businesses, and industrial buildings. Licensed, insured, and open 24/7.

  • Serving all of Port Salerno
  • Free written estimates
  • Open 24/7
  • Licensed & insured

Standard Insulation works throughout Port Salerno, Martin County, installing the full range of insulation systems that actually make sense in South Florida. The building stock in Port Salerno spans several decades of construction practice, and the insulation situation we find varies enormously from one street to the next — but the pattern is consistent: under-depth attics, unsealed ceiling planes, and ductwork baking in a superheated attic.

Air sealing comes before insulation in Port Salerno

This is the part most Port Salerno homeowners have never had explained to them. Insulation resists heat conduction. It does absolutely nothing to stop air from moving through it. If we blow R-38 over a ceiling full of unsealed recessed light housings, plumbing penetrations, top plates, and an uninsulated attic hatch, you have paid for R-38 and you will experience something considerably less.

On every Port Salerno job we seal the ceiling plane first — penetrations foamed, can lights covered or replaced with airtight housings, the attic hatch weatherstripped and insulated, and bath fans verified to actually terminate outside rather than dumping humid air into the attic. Then we insulate. It adds a few hours and it changes the result substantially.

Humidity is half the problem in Port Salerno

People in Port Salerno describe the symptom as the house feeling clammy even when the thermostat reads 74. That is a humidity problem, and it usually traces back to air leakage rather than to the air conditioner.

Outdoor air in South Florida carries a lot of moisture. Every cubic foot of it that leaks into your house through the ceiling plane has to be dehumidified by your AC, which is why an air-sealed house feels dramatically better at the same thermostat setting. It's also why an oversized air conditioner makes Port Salerno homes feel worse — it satisfies the thermostat and shuts off before it has run long enough to actually pull moisture out of the air.

Port Salerno block walls and the forgotten surface

A large share of Port Salerno construction is concrete block — CMU with interior furring strips and drywall, and empty air in between. Block has essentially no meaningful thermal resistance. A west-facing block wall in Port Salerno absorbs sun all afternoon and keeps radiating heat into the room well past sunset.

Fi-Foil furring-strip reflective systems and injected foam both install into that cavity from the interior, don't cost you floor space, and deliver a real system R-value where there was almost none. On the west and south elevations of a Port Salerno home, it's a difference you can feel with your hand on the drywall.

All Services in Port Salerno

Every Type of Insulation Available in Port Salerno, FL

Residential, commercial, and industrial — the complete envelope under one contractor.

Property Types

Who We Serve in Port Salerno

Insulation types in Port Salerno

Every insulation type we install in Port Salerno

Each one has its own Port Salerno page with local pricing, Florida code requirements and FAQs.

Port Salerno Insulation FAQs

How much does insulation cost in Port Salerno, FL?

Most Port Salerno attic insulation projects fall between $1.50 and $4.50 per square foot installed. A typical 2,000 sq ft Port Salerno home runs roughly $2,200–$4,500 for a blown-in top-up to R-38, and $6,000–$13,000 for a full closed-cell spray foam roof deck encapsulation. Insulation removal adds about $1.00–$2.00 per square foot. Standard Insulation gives free, written, itemized estimates throughout Port Salerno and Martin County — call (561) 975-6204.

What R-value do I need in a Port Salerno attic?

Port Salerno falls in Florida Climate Zone 2 under the Florida Building Code, Energy Conservation (8th Edition). That means R-38 minimum for attics, with R-49 being the practical target for real comfort and utility savings. Many Port Salerno homes built before 2005 are still measuring R-11 to R-19, which is a large part of why their summer bills are so high.

Do you offer spray foam insulation in Port Salerno?

Yes. We install both open-cell and closed-cell spray foam throughout Port Salerno, Martin County. Closed-cell on the roof deck is the strongest option here — it air seals, controls humidity, brings your ducts into conditioned space, and adds measurable uplift resistance to your roof sheathing, which matters in a hurricane-exposed part of Florida.

How fast can you get to Port Salerno?

We answer the phone 24 hours a day, 7 days a week. In Martin County we can usually be on site for a free assessment within 24 to 48 hours, and emergency insulation removal after a roof leak or storm gets same-day priority whenever we can make it happen.

Do you handle commercial insulation in Port Salerno?

Yes — offices, retail, restaurants, hotels, medical, warehouses, distribution, manufacturing, and cold storage throughout Port Salerno and Martin County. We carry envelope, mechanical, and fire-rated scopes, and we work nights and weekends in occupied buildings with containment and HEPA filtration.

Are you licensed and insured to work in Port Salerno?

Yes. Standard Insulation is a licensed Florida insulation contractor carrying general liability and workers' compensation coverage, and we work throughout Port Salerno and all of Martin County. Certificates of insurance are provided to homeowners, general contractors, and property managers on request before any work begins.

Can insulation lower my electric bill in Port Salerno?

Cooling is roughly half of a typical Port Salerno electric bill. Bringing an under-insulated attic from R-11 up to a properly air-sealed R-38 commonly cuts the cooling portion by 20 to 30 percent — and more if your ductwork is in the attic and we add a radiant barrier. On a $300 summer bill that's usually $30 to $45 a month back in your pocket.

What is the best insulation for a Port Salerno home?

It depends on your building and your budget, and we'll tell you honestly which one applies. If your attic is at R-13 and you want the most improvement per dollar, blown-in fiberglass to R-38 with proper air sealing is the answer. If your ducts are in the attic and you want humidity control and the biggest total comfort win, closed-cell spray foam on the roof deck is the answer. If your roof is more than twelve years old, do the roof first — we'll say so.

Get Your Free Insulation Estimate

Answer 6 quick questions. We call back fast — we're open 24/7. No pressure, no obligation, no charge for the estimate.

1 · Where is the job?
We serve every city in all 67 Florida counties.
2 · What kind of property?
3 · Which insulation services do you need? *

Prefer to talk? Call (561) 975-6204 — we answer 24/7. Or email bids@standard-insulation.com.

Free Insulation Estimate in Port Salerno

No obligation, no charge. Call (561) 975-6204 — we're open 24/7.

Open 24/7 · 5827 Plunkett St, Hollywood, FL 33023 · bids@standard-insulation.com

📞 Contact Us Now 💬 Free Estimate
📞 Contact Us Now 💬 Free Estimate